Power Window Control Switch: Installation
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- After installing the switch - power window main, always perform the initial setting.
Failure to do so may cause the improper activation of auto-reverse operation for pinching hazard prevention.
- Use protective paper to avoid damage to the trim panel.
- Install each part in the reverse order of removal.
- Perform initial setting operation (reset operation A). < Ref. to RESET OPERATION A , OPERATION, Power Window System. >