Inspection steps
CAUTION:
- Some functions of the entry & start system (entry function) use the LIN communication system and the CAN communication system. Inspect the communication function by referring to "How to troubleshoot" (Refer to HOW TO PROCEED WITH TROUBLESHOOTING ). Confirm that the communication system is functioning properly before proceeding to repair the entry & start system (entry function).
- Refer to "Entry & start system (entry function)" before proceeding to replace the collation ECM (smart key ECM assembly). (Refer to ENTRY & START SYSTEM (ENTRY FUNCTION) )
- Check the entry door lock operation.
- Check if the entry function works properly. (Refer to OPERATION CHECK
)
Criteria: The entry function works properly.
NG: Go to "Symptom table" (Refer to PROBLEM SYMPTOMS TABLE ).
OK: Go to "Meter & gauge system" ("SYMPTOM TABLE ").
- Check if the entry function works properly. (Refer to OPERATION CHECK
)