Navigation Assembly: Removal

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
Remove the instrument cluster finish panel SUB-ASSY CTR. (Refer to REMOVAL )

Fig 1: Identifying Navigation ASSY Mounting Bolts

Courtesy of SUBARU OF AMERICA, INC.

Remove the navigation ASSY.
1. Undo the four bolts and pull out the navigation ASSY toward the rear of the vehicle.
2. Disconnect each connector and remove the navigation ASSY.

Fig 2: Identifying Navigation Bracket Screws

Courtesy of SUBARU OF AMERICA, INC.

Remove the navigation bracket No. 1.
1. Undo the four screws and remove the navigation bracket No. 1 from the navigation ASSY.
Remove the navigation bracket No. 2.
NOTE: Perform the same procedure as with the navigation bracket No. 1.