Unit Inspection

Check of select lever Assembly

Measure the resistance between the terminals.

Resistance

Inspection terminals	Inspection conditions (shift position)	Standard value
1 - 3	Select lever in any other than P position	Less than 1 Ω
2 - 3	Select lever in P position
8 - 9	When select lever is in M position and shifted to "+"
10 - 11	Select lever in M position
12 - 13	When select lever is in M position and shifted to "-"
1 - 3	Select lever in P position	10 k Ωor more
2 - 3	Select lever in any other than P position
8 - 9	Except when select lever is in M position and shifted to "+"
10 - 11	Select lever in any other than M position
12 - 13	Except when select lever is in M position and shifted to "-"

Fig 1: Select Lever Assembly Connector Terminal Identification

Courtesy of SUBARU OF AMERICA, INC.

Check of shift lock solenoid Assembly

Measure the resistance between the terminals.

Resistance

Inspection terminals	Inspection conditions	Standard value
4 - 5	20°C	27.6 to 30.5 Ω

Fig 2: Shift Lock Solenoid Assembly Connector Terminal Identification

Courtesy of SUBARU OF AMERICA, INC.