Front Speed Sensor: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following procedure is for LH side. Perform the same procedures both for the LH side and RH side, unless otherwise specified.

Installation of speed sensor FR LH
1. Install the speed sensor FR LH with bolt.
  CAUTION: Do not let foreign matter stick to the installation part and the tip of the speed sensor FR LH.
  
  Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
2. Attach 6 clamps.
  CAUTION: Do not attach the speed sensor FR LH with the sensor twisted.
3. Connect the connector for the speed sensor FR LH.
Installation of front mud guard LH (Refer to INSTALLATION )
Installation of front tire
Standard value: T=120N.m {1224kgf.cm} {88.5ft.lbf}