Data Monitor/Active Test
- Data monitor list
- Turn the ignition switch to OFF.
- Connect the SSM3 to the DLC3.
- Turn the ignition switch to ON.
- Follow the SSM3 display and select [Each System Check] →[Integ. unit mode] →[Current Data Display & Check] to bring up the data monitor item list.
- Use the data monitor to judge whether a component is working or not, and to narrow down the location of trouble.
SSM3 screen: [Each System Check] →[Integ. unit mode] →[Current Data Display & Save]
SSM3 DISPLAY REFERENCEItem name Description/display range Normal value Remarks (Main inspection items during a malfunction) [BATT voltage (control)] - Shows the BATT (control) voltage.
- Display range: 0 - 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with battery voltage. [BATT voltage (BACK-UP)] - Shows the BATT voltage back-up.
- Display range: 0 - 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with battery voltage. [ABS_CM Power Voltage] - Shows the IG power supply voltage.
- Display range: 0 - 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with the IG circuit. [ACC voltage] - Shows the ACC voltage.
- Display range: 0 - 21.4 V
11 to 14 V When a malfunction occurs, it may be due to a problem with the ACC circuit.