LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System (Diagnostics) (H6DO) - Introduction) >> Diagnostics for Engine Starting Failure >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostics for Engine Starting Failure: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Check of the fuel amount

  2. Inspection of starter motor circuit <Ref. to STARTER MOTOR CIRCUIT , Diagnostics for Engine Starting Failure.>

  3. Inspection of ECM power supply and ground line <Ref. to CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM) , Diagnostics for Engine Starting Failure.>

  4. Inspection of ignition control system <Ref. to IGNITION CONTROL SYSTEM , Diagnostics for Engine Starting Failure.>

  5. Inspection of fuel pump circuit <Ref. to FUEL PUMP CIRCUIT , Diagnostics for Engine Starting Failure.>

  6. Inspection of fuel injector circuit <Ref. to FUEL INJECTOR CIRCUIT , Diagnostics for Engine Starting Failure.>