LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System (Diagnostics) >> Inspection Mode >> Procedure >> Inspection Mode 3
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Mode 3

DTC Item Note
B1013 Ignition Power Failure -

Diagnostic procedure:

  1. Perform the Clear Memory Mode.
  2. Read the DTC and check that the DTC is not displayed.
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step  1.
  3. After the ignition switch is ON, wait for one minute or more.
  4. Read the DTC and check that the DTC is not displayed.
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
scientia non olet · About LEMON Manuals