LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Operation >> Impact Sensor Setting Using SUBARU Select Monitor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Impact Sensor Setting Using SUBARU Select Monitor

  1. Prepare the Subaru Select Monitor kit.
  2. Turn the ignition to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
  3. On «System Selection Menu» display, select {Integ. unit mode}.
  4. Select {Unit customizing} from {Work Support}.
  5. Make an impact monitor setting.
    • When installing: ON
    • When removing: OFF
  6. Make an impact monitor ON/OFF setting.
    • When installing: ON
    • When removing: OFF
  7. Turn the ignition to OFF, and then remove the Subaru Select Monitor.
scientia non olet · About LEMON Manuals