Read Current Data
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
| Display | Contents to be displayed | Unit of measure |
|---|---|---|
| Trip Count | Total number of ignition switch ON | times |
| Count | Counter | - |
| Time Count | Elapsed time after ignition switch ON | ms |
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h or MPH |
| Steering Angle Sensor | Steering angle detected by steering angle sensor is displayed. | deg |
| Yaw Rate Sensor | Vehicle angular speed detected by yaw rate sensor is displayed. | deg/s |
| Master Cylinder Pressure Sensor | Brake fluid pressure detected by pressure sensor is displayed. | bar |
| Longitudinal G Sensor | Vehicle longitudinal acceleration detected by longitudinal G sensor is displayed. | m/s2 |
| Lateral G Sensor | Vehicle lateral acceleration detected by lateral G sensor is displayed. | m/s2 |
| Voltage of IGN | Voltage supplied to VDCCM & H/U is displayed. | V |
| M. Relay monitor Voltage | Voltage applied to the motor relay is displayed. | V |
| Motor Relay Signal | Motor relay driving signal is displayed. | ON or OFF |
| Valve Relay Signal | Valve relay driving signal is displayed. | ON or OFF |
| EBD Warning Light | ON operation of the EBD warning light is displayed. | ON or OFF |
| ABS Warning Lamp | ON operation of the ABS warning light is displayed. | ON or OFF |
| VDC Warning Lamp | ON operation of the VDC warning light is displayed. | ON or OFF |
| EBD Control Flag | EBD operation condition is displayed. | ON or OFF |
| ABS Control Flag | ABS operation condition is displayed. | ON or OFF |
| TCS Control Flag | TCS operation condition is displayed. | ON or OFF |
| VDC Control Flag | VDC operation condition is displayed. | ON or OFF |
| E/G Control Stop | Flag Engine control command signal is displayed. | 1 or 0 |
| E/G torques up Control Stop Flag | Engine control command signal is displayed. | 1 or 0 |
| VDC-OFF Light | ON/OFF condition of VDC OFF indicator light is displayed. | ON or OFF |
| OFF SW Signal | Operation condition of VDC OFF switch is displayed. | ON or OFF |
| Brake Light Switch | Brake ON/OFF is displayed. | ON or OFF |
| Clutch switch | Clutch ON/OFF is displayed. (MT model) | ON or OFF |
| Reverse Signal | Reverse gear ON/OFF is displayed. (MT model) | ON or OFF |