Read Freeze Frame Data
NOTE:
- Freeze frame data stored at the time of trouble occurrence is shown on the display.
- Each time a trouble occurs, the latest information is stored in the freeze frame data in memory.
| Display | Contents to be displayed | Unit of measure |
|---|---|---|
| Classification | Recorded trouble code is displayed. | - |
| Trip Count | Total number of ignition switch ON | times |
| Count | Counter | - |
| Time Count | Elapsed time after ignition switch ON | ms |
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h or MPH |
| Vehicle speed | Vehicle speed calculated by VDC control module is displayed. | km/h or MPH |
| Steering Angle Sensor | Steering angle detected by steering angle sensor is displayed. | deg |
| Yaw Rate Sensor | Vehicle angular speed detected by yaw rate sensor is displayed. | deg/s |
| Master Cylinder Pressure Sensor | Brake fluid pressure detected by pressure sensor is displayed. | bar |
| Longitudinal G Sensor | Vehicle longitudinal acceleration detected by longitudinal G sensor is displayed. | m/s2 |
| Lateral G Sensor | Vehicle lateral acceleration detected by lateral G sensor is displayed. | m/s2 |
| Voltage of IGN | Voltage supplied to VDC control module is displayed. | V |
| Acceleration Pedal Position | Accelerator pedal opening angle is displayed. | % |
| Engine Speed | Engine speed on malfunction occurrence is displayed. | rpm |
| Steering angle flag | Whether the absolute angle of the steering angle sensor was determined is displayed. | Recognized or No recognition |
| EBD Control Flag | EBD control condition is displayed. | ON or OFF |
| ABS Control Flag | ABS control condition is displayed. | ON or OFF |
| TCS Control Flag | TCS control condition is displayed. | ON or OFF |
| VDC Control Flag | VDC control condition is displayed. | ON or OFF |
| E/G Control Stop | Flag Engine control command signal is displayed. | 1 or 0 |
| E/G torques up Control Stop Flag | Engine control command signal is displayed. | 1 or 0 |
| VDC OFF Status | ON/OFF condition of the VDC operated by the driver is displayed. | ON or OFF |
| Brake Light Switch | Brake ON/OFF is displayed. | ON or OFF |
| Clutch switch | Clutch ON/OFF is displayed. (MT model) | ON or OFF |
| Reverse Signal | Reverse gear ON/OFF is displayed. (MT model) | ON or OFF |