Write Parameter

Connect the Subaru Select Monitor.
On «Main Menu» display, select {Each System Check}.
On «System Selection Menu» display, select {Brake Control System}.
When {VDC} is displayed, select the [OK] button.
On «Brake Control Diagnosis» display, select {Work Support}.
On «Work Support» display, select {Maintenance at the time of ECM replacement}.
Select «Writing of parameter: SSM to ECM».
Open the file saved in the «Reading of parameter: ECM to SSM» procedure.
When the confirmation screen indicating the vehicle information appears, check that the correct applied model and grade are displayed and click the [OK] button.