LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Sunroof) >> Sunroof Control System >> Operation >> Initialize Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialize Operation

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If the switch is released during initialization operation, perform the procedure over.
  1. Turn the ignition switch to ON.
  2. Completely tilt open the lid assembly - sunroof.
  3. Release the switch once, and press and hold the tilt up switch or close switch again for approx. 3 minutes.
  4. Initial learning mode will start to operate until the fully tilt closed position. The lid assembly - sunroof moves to the fully closed position, fully open position, and the fully closed position successively, and stops at the fully closed position.
  5. Release the tilt up switch or the close switch, and turn the ignition switch to OFF.
  6. Initial learning is completed.
scientia non olet · About LEMON Manuals