Check Connections With Line Diag Mode

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Model with 6.2 inch display

Turn the ignition switch to ACC.
Press the button (a) to display the Audio OFF screen.
Touch the screen in order from (b) to (e).

Fig 1: Identifying Audio OFF Screen Button
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the Line Diag mode.
{Line Diag} screen is displayed.
Check the connection status with the {Connectivity Check} in the {Line Diag} screen.

Fig 2: Screen Display - Connection Status
Courtesy of SUBARU OF AMERICA, INC.

OK: Each connection device is connected properly.

NG: No connection or abnormal connection is detected.

NOTE: Check the external connection terminals (USB 1, 2 and AUX) by connecting a memory for check or a pin jack.

Model with 7 inch display

Operation is the same as that of navigation assembly, therefore, refer to "Navigation System". < Ref. to CHECK CONNECTIONS WITH LINE DIAG MODE , OPERATION, Navigation System. >