Function Check: List
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- On «Main Menu» display, select «Each System Check».
- On «Each System Check» display, select «Integ. unit mode».
- On «Integ. unit mode» display, select «Work Support».
- On «Work Support» display, select «Active Test».
- Select an item to be operated on «Active Test» display, and press the [OK] button.
- Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.
Item Display Note lock actuator LOCK output ON/OFF - All seat UNLOCK output ON/OFF - R gate/trunk UNLOCK output ON/OFF - Shift lock solenoid output ON/OFF - Key lock solenoid output ON/OFF - Keyless Buzzer Output ON/OFF - Horn Output ON/OFF - Panic Braking Hazard Light Setting ON/OFF - NOTE: If not equipped due to the vehicle settings, the operation will not start.