Read Current Data: List
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| Items to be displayed | Content | Unit of measure | Note |
|---|---|---|---|
| BATT voltage (control) | Constant power supply from the battery. Input value to the body integrated unit. | 0 - 21.5 V | - |
| BATT voltage (BACKUP) | Constant power supply from the battery. Input value to the body integrated unit. | 0 - 21.5 V | - |
| Ignition Power Supply Voltage | IG system circuit voltage. Input value to the body integrated unit. | 0 - 21.5 V | - |
| ACC voltage | ACC system circuit voltage. Input value to the body integrated unit. | 0 - 21.5 V | - |
| number of regist. | Number of the registered key in the keyless entry system. | 0 - 4 | Model without keyless access with push button start system |
| Front Wheel Speed | Front wheel average speed. CAN data input value. Received from the VDC control module. | km/h | - |
| Fuel consumption | Injection quantity per 1 sec calculated from an instantaneous fuel injection quantity per 50 msec. CAN data input value. Received from the ECM. | cc/s | - |
| Engine Coolant Temperature | Engine coolant temperature. CAN data input value. Received from the ECM. | -40 - 215°C | - |
| Shift Position | Shift position. CAN data input value. Received from the TCM. | 1 - 3, D-S, D, N, R, P | - |
| Buzzer beeping request | Passenger room buzzer beeping request. CAN data output value. Sent to the combination meter. | Status for 'beeping deactivated' Reverse warning Key warning buzzer Light Remained Buzzer Customize 1 Customize 2 Registration completed 1 Registration completed 2 Registered Registration NG | - |
| EPB State | EPB operating status. CAN data input value, received from the VDC. | Error Released Operate Operating Releasing Dynamic Parking |
- |
| Destination Code | Vehicle destination information. CAN data receiving value. Received from the combination meter. | JPN U4, U5, U6 C0 EC, EA, E2, EL K4, C4, C6 KS EK ER, EN KA, KC EH C6 |
- |
| Illumination Sensor Output | Output voltage from the illumination sensor. Body integrated unit input value. | 0 - 5 V | - |
| Off delay time | Interior light off delay time. Body integrated unit custom setting values. | OFF 10 Sec 20 Sec 30 Sec |
- |
| Auto Light Sensitivity Adjustment | Sensitivity of auto light function. Body integrated unit custom setting values. | Dull Normal Sensitive Very sensitive |
- |
| key-lock warning SW | Key warning switch ON/OFF status. Body integrated unit input value. Set to ON when the ignition key is inserted. | ON/OFF | Model without keyless access with push button start system |
| ACC Input | ACC ON/OFF status. Body integrated unit input value. Set to ON when the ignition switch is turned to ACC. | ON/OFF | Model with keyless access with push button start system |
| Stop Light Switch | Brake switch ON/OFF status. Body integrated unit input value. Set to ON when the brake pedal is pressed. | ON/OFF | - |
| Front fog lamp SW input | Front fog light switch ON/OFF status. Body integrated unit input value. Set to ON when the front fog light switch is ON. | ON/OFF | - |
| Driver's door SW input | Driver's door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| P-door SW input | Passenger's door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear right door SW input | Rear right door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear left door SW input | Rear left door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| R Gate SW input | Rear gate/trunk switch ON/OFF status. Body integrated unit input value. Set to ON when the rear gate/trunk is open. | ON/OFF | - |
| Manual lock SW input | ON/OFF status of the manual lock switch located on the power window main switch (or on the passenger's side power window switch). Body integrated unit input value. Set to ON when the manual lock switch is set to lock. | ON/OFF | - |
| Manual unlock SW input | ON/OFF status of the manual lock switch located on the power window main switch (or on the passenger's side power window switch). Body integrated unit input value. Set to ON when the manual lock switch is set to unlock. | ON/OFF | - |
| P SW | P range switch ON/OFF status. Body integrated unit input value. Set to ON in the P range. | ON/OFF | - |
| MT Reverse Switch | MT back-up light switch ON/OFF status. Body integrated unit input value. Set to ON when the shift lever is set to R range and the back-up light switch is ON. | ON/OFF | - |
| R wiper ON SW input | Rear wiper ON switch ON/OFF status. Body integrated unit input value. Set to ON when the rear wiper switch is ON. | ON/OFF | - |
| R wiper INT SW input | Rear wiper INT switch ON/OFF status. Body integrated unit input value. Set to ON when the rear wiper switch is in the INT position. | ON/OFF | - |
| R washer SW input | Rear washer switch ON/OFF status. Body integrated unit input value. Set to ON when the rear washer switch is ON. | ON/OFF | - |
| Fr wiper input | Front wiper return switch ON/OFF status. Body integrated unit input value. Set to ON when the front wiper is outside of the stop position. | ON/OFF | - |
| Driver's seat lock status SW input | ON/OFF status of the driver's seat lock status switch. Body integrated unit input value. Set to ON when the door status is LOCK. | ON/OFF | Model with keyless access with push button start system |
| Passenger's seat lock status SW input | ON/OFF status of the passenger's seat lock status switch. Body integrated unit input value. Set to ON when the door status is LOCK. | ON/OFF | Model with keyless access with push button start system |
| R gate lock status SW input | ON/OFF status of the rear gate lock status switch. Body integrated unit input value. Set to ON when the rear gate status is LOCK. | ON/OFF | - |
| R Gate Release SW input | ON/OFF status of the rear gate release switch/trunk opener switch. Body integrated unit input value. Set to ON when the rear gate release switch/trunk opener switch is pressed. | ON/OFF | - |
| Rr Defogger output | Rear defogger relay output ON/OFF status. Body integrated unit output value. Set to ON when the rear defogger is activated. | ON/OFF | - |
| lock actuator LOCK output | Door lock actuator output ON/OFF status. Body integrated unit output value. Set to ON when a lock signal is output. | ON/OFF | - |
| All seat UNLOCK output | ON/OFF status of the all door lock actuator output. Body integrated unit output value. Set to ON when an all door unlock signal is output. | ON/OFF | - |
| D-seat UNLOCK output | ON/OFF status of the driver's door lock actuator output Body integrated unit output value. Set to ON when a driver's door/all door unlock signal is output. | ON/OFF | - |
| R gate/trunk UNLK output | Rear gate/trunk lock actuator ON/OFF status. Body integrated unit output value. Set to ON when an unlock signal is output. | ON/OFF | - |
| Rear Wiper Output | Rear wiper relay output ON/OFF status. Body integrated unit output value. Set to ON when the rear wiper is activated. | ON/OFF | - |
| Shift Lock Solenoid | Shift lock solenoid output ON/OFF status. Body integrated unit output value. Solenoid is activated to set this item to ON when depressing the brake pedal with the shift lever in P range. | ON/OFF | - |
| Key lock solenoid output | Key lock solenoid output ON/OFF status. Body integrated unit output value. Solenoid is activated to set this item to ON when the key is inserted with the shift lever in other than P range. | Lock/Unlock | Model without keyless access with push button start system |
| wiper deicer output | Wiper deicer output ON/OFF status. Body integrated unit output value. Set to ON while the wiper deicer is operating. | ON/OFF | - |
| Keyless Buzzer Output | Keyless buzzer ON/OFF status. Body integrated unit output value. Set to ON while the keyless buzzer is sounding. | ON/OFF | - |
| Horn Output | Security horn output ON/OFF status. Body integrated unit output value. Set to ON while the horn is sounding due to a security breach. | ON/OFF | - |
| Room lamp output | Room light output ON/OFF status. Body integrated unit output value. Set to ON while the room light illuminates with the switch in DOOR position. | ON/OFF | - |
| key illumination lamp o/p | Key illumination light output ON/OFF status. Body integrated unit output value. Set to ON while the key illumination light illuminates. | ON/OFF | Model without keyless access with push button start system |
| Immobilizer lamp output | Immobilizer pilot light output ON/OFF status. Body integrated unit output value. Set to ON while the immobilizer indicator in the combination meter illuminates. | ON/OFF | - |
| Keyless operation 1 | Keyless mode registration mode status of the body integrated unit. Set to Register while in the keyless registration mode. | Register/Normal | Model without keyless access with push button start system |
| Keyless operation 2 | Keyless mode delete mode status of the body integrated unit. Set to Deletion while in the keyless delete mode. | Deletion/Normal | Model without keyless access with push button start system |
| Small Light SW | Lighting 1 relay CAN output ON/OFF status. CAN data sending value. Set to ON when the position light indicator in the combination meter illuminates. | ON/OFF | - |
| Headlamp | Lighting Lo relay CAN output ON/OFF status. CAN data output value. Set to ON when the headlight Lo illuminates. | ON/OFF | - |
| High Beam | Lighting Hi relay CAN output ON/OFF status. CAN data output value. Set to ON when the headlight Hi illuminates. | ON/OFF | - |
| Power rear gate setting | Presence or absence of the power rear gate. Body integrated unit custom setting values. | ON/OFF | - |
| Lane change signal setting | Presence or absence of the one-touch blinker control. Body integrated unit custom setting values. | ON/OFF | - |
| Rear wiper auto setting | Presence or absence of the rear wiper control linked with reverse shift. Body integrated unit custom setting values. | ON/OFF | - |
| Left turn signal input | Left turn signal switch ON/OFF status. Body integrated unit input value. Set to ON while the left turn signal switch is ON. | ON/OFF | - |
| Right turn signal input | Right turn signal switch ON/OFF status. Body integrated unit input value. Set to ON while the right turn signal switch is ON. | ON/OFF | - |
| Left turn signal output | Left turn signal light output ON/OFF status. Body integrated unit output value. Set to ON while the left turn signal light illuminates. | ON/OFF | - |
| Right turn signal output | Right turn signal light output ON/OFF status. Body integrated unit output value. Set to ON while the right turn signal light illuminates. | ON/OFF | - |
| TPMS Setting | Presence or absence of TPMS. Body integrated unit custom setting values. | TPMS/No TPMS | - |
| Driver's Door Unlock Setting | Presence or absence of the driver's seat select unlock control. Body integrated unit custom setting values. | Selection/ALL | Model with keyless access with push button start system |
| Rear Gate Unlock Setting | Presence or absence of the rear gate select unlock control. Body integrated unit custom setting values. | Selection/ALL | Model with keyless access with push button start system |
| Wiper link Auto Light Setup | ON/OFF status of the wiper interlock auto light function control. Body integrated unit custom setting values. |
ON/OFF | - |
| High Beam Assist Function | Presence or absence of high beam assist. Body integrated unit custom setting values. | ON/OFF | - |
| Head Lamp Low Beam Specification | Headlight low beam light source type. Body integrated unit custom setting values. | Halogen/HID/LED | - |
| Head Lamp High Beam Specification | Headlight high beam light source type. Body integrated unit custom setting values. | Halogen/HID/LED | - |
| High Beam Assist Current Setting | Presence or absence of high beam assist. Body integrated unit custom setting values. | ON/OFF | - |
| HBA indicator | Set to ON when high beam assist is activated. CAN data output value. | OFF/ON | - |
| High Beam Assist Failure Indicator | Set to ON when high beam assist fails. CAN data output value. | OFF/ON | - |
| High Beam Assist Failure Message | Sends display status of high beam assist related words. CAN data output value. |
No Display/HALT/Fail | - |
| < HBA >High Beam Request Status | Set to Request when high beam is requested for high beam assist module. High beam assist module CAN data output value. |
Non Request/Request | - |
| < HBA >R Range Signal | Set to ON when shift lever is at reverse position. High beam assist module CAN data input value. | ON/OFF | - |
| < HBA >Head Lamp Low Beam Signal | Set to ON when the headlight low beam illuminates. High beam assist module CAN data input value. | ON/OFF | - |
| < HBA >Head Lamp High Beam Signal | Set to ON when the headlight high beam illuminates. High beam assist module CAN data input value. | ON/OFF | - |
| < HBA >High Beam Assist Status | High beam assist module internal status. High beam assist module CAN data output value. | Initialization/Poor Visibility/Nothing Sensed/Head light Detect/Taill light Detect/Speed Under Threshold/Day Detect/Village Mode/Yaw Not Used/Abnormal/Delay/SAE Mode/Temp Malfunction | - |
| < HBA >Yaw Rate & Speed Signal | Set to ON during high beam suppression when rounding a curve. High beam assist module CAN data output value. |
ON/OFF | - |
| < HBA >Brightness & Color Detection | Set to Detect when a tunnel is detected. High beam assist module CAN data output value. | Not Detect/Detect | - |
| < HBA >Street Lamp & Surrounding Detection | Set to Detect when an urban area is detected. High beam assist module CAN data output value. | Not Detect/Detect | - |
| < HBA >High Speed Signal | Set to ON in high speed mode. High beam assist module CAN data output value. | ON/OFF | - |
| < HBA >High Beam Assist Camera | Set to Abnormal when camera is faulty. High beam assist module CAN data output value. | Normal/Abnormal | - |
| < HBA > ECU | Set to Abnormal when high beam assist module is malfunctioning. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA >Camera Position Correlation | Set to Abnormal when camera's angle of view is outside the tolerance. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA > Adjustment | Set to Completed when high beam assist operation becomes enabled. High beam assist module CAN data output value. |
incomplete/complete | - |
| < HBA > Registration | Set to Abnormal when specifications are not confirmed. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA >Lost Communication with VDC | Set to Abnormal when VDC data has not yet arrived. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA >Invalid Data Received from VDC | Set to Abnormal when VDC data is abnormal. High beam assist module CAN data output value. | Normal/Abnormal | - |
| < HBA >Lost Communication with Body Integrated Unit(BIU) | Set to Abnormal when body integrated unit data has not yet arrived. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA >Invalid Data Received from Body Integrated Unit(BIU) | Set to Abnormal when body integrated unit data is abnormal. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA >Lost Communication with Combination Meter (MET) | Set to Abnormal when combination meter data has not yet arrived. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA >Invalid Data Received from Combination Meter (MET) | Set to Abnormal when combination meter data is abnormal. High beam assist module CAN data output value. |
Normal/Abnormal | - |
| < HBA >Head Lamp Low Beam Specification | High beam assist module CAN data input value. High beam assist module CAN data output value. | Halogen/HID/LED | - |
| < HBA >Head Lamp High Beam Specification | High beam assist module CAN data input value. High beam assist module CAN data output value. | Halogen/HID/LED | - |
| < HBA >Lane Recognition Status | High beam assist module lane recognition status. High beam assist module CAN data output value. |
RIGHT/LEFT | - |
| < HBA >Street Lamp & Surrounding Status | When Street Lamp & Surrounding Status mode is activated, set to Enable. High beam assist module CAN data output value. |
Disable/Enable | - |
| < HBA >Vehicle Yaw Direction | Vehicle input in the yaw direction. High beam assist module CAN data output value. |
CENTER/RIGHT/LEFT | - |
| < HBA >Destination Code | Vehicle destination. High beam assist module CAN data output value. |
JPN U4, U5, U6 C0 EC, EA, E2, EL K4, C4, C6 KS EK ER, EN KA, KC EH C6 |
- |
| < HBA >Vehicle Model Information | Vehicle model. High beam assist module CAN data output value. |
Impreza Type/WRX Type/Legacy/Outback Type/Forester Type | - |
| < HBA >Vehicle Speed | Vehicle speed (resolution: low). High beam assist module CAN data output value. |
- | - |
| Camera X direction Coordinate | High beam assist module, correction value of the angle of view center position (X coordinate). High beam assist module CAN data output value. | - | - |
| Camera Y direction Coordinate | High beam assist module, correction value of the angle of view center position (Y coordinate). High beam assist module CAN data output value. | - | - |
| Lighting I Switch Input | Lighting 1 switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting 1 switch is ON. | ON/OFF | - |
| Lighting II Switch Input | Lighting 2 switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting 2 switch is ON. | ON/OFF | - |
| Lighting AUTO input | Lighting AUTO switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting AUTO switch is ON. | ON/OFF | - |
| Dimmer Hi Switch Input | Dimmer Hi switch ON/OFF status. Body integrated unit input value. Set to ON while the dimmer Hi switch is ON. | ON/OFF | - |
| Dimmer Passing Switch | Input Dimmer Pass switch ON/OFF status. Body integrated unit input value. Set to ON while the dimmer Pass switch is ON. | ON/OFF | - |
| Illumination sensor flag | Presence or absence of the illumination sensor. Body integrated unit internal data. | ON/OFF | - |
| Lighting I Lamp Output | Lighting 1 relay output ON/OFF status. Body integrated unit output value. Set to ON while the position light illuminates. | ON/OFF | - |
| Lighting II Lamp Output | Lighting Lo relay output ON/OFF status. Body integrated unit output value. Set to ON while the lighting Lo illuminates. | ON/OFF | - |
| Lighting Hi Light Output | Lighting Hi relay output ON/OFF status. Body integrated unit output value. Set to ON while the lighting Hi illuminates. | ON/OFF | - |
| Front Fog Lamp Output | Front fog light relay output ON/OFF status. Body integrated unit output value. Set to ON while the front fog light illuminates. | ON/OFF | - |
| DRL Cancel Output | DRL cancel relay output ON/OFF status. Body integrated unit output value. Set to ON while the lighting Hi illuminates. | ON/OFF | - |
| Power Supply Tr | Lighting power supply relay output ON/OFF status. Body integrated unit output value. Set to ON while the light illuminates with the key removed or while the key is inserted (including ACC and IGN ON). | ON/OFF | - |
| Map lamp output | Map light output ON/OFF status. Body integrated unit output value. Set to ON while the map light illuminates with the switch in DOOR position. | ON/OFF | - |
| Luggage/Trunk lamp output | Luggage/trunk light output ON/OFF status. Body integrated unit output value. Set to ON while the luggage/trunk light illuminates with the switch in DOOR position. | ON/OFF | - |
| Front washer switch input | ON when the front wiper washer switch is ON. Body integrated unit input value. | ON/OFF | - |
| Rear defogger operation mode | Status of the rear defogger operation mode. Body integrated unit custom setting values. | Continuous/Normal | - |
| Security Alarm Setup | Alarm ON/OFF status when the security system is activated. Body integrated unit custom setting values. | ON/OFF | - |
| Impact Sensor Setup | Impact sensor ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Alarm delay setup | Alarm monitoring delay function ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Lockout prevention | Key lockout prevention function ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Impact sensor | Presence or absence of the impact sensor. Body integrated unit custom setting values. | ON/OFF | - |
| Buzzer sounding setting | Answer-back buzzer sounding ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Abnormal warning lamp flashing setting | Hazard answer-back ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Answer-back Buzzer | Presence or absence of the answer-back buzzer. Body integrated unit custom setting values. | ON/OFF | - |
| Automatic lock YES/NO | Presence or absence of the auto lock function. Body integrated unit custom setting values. | ON/OFF | - |
| Door open warning | Presence or absence of the door open warning function. Body integrated unit custom setting values. | ON/OFF | - |
| Dome Light Alarm Setting | Room light illumination ON/OFF status when the alarm is activated. Body integrated unit custom setting values. | ON/OFF | - |
| Auto A/C ECU Setting | Presence or absence of the A/C ECM. Body integrated unit custom setting values. | ON/OFF | *For LEGACY, set to ON for models with manual A/C, too. |
| Wiper Deicer setting | Presence or absence of the wiper deicer. Body integrated unit custom setting values. | ON/OFF | - |
| Sedan/Wagon Setting | Vehicle type, Sedan/Wagon (OBK). Body integrated unit custom setting values. | SEDAN/WAGON | - |
| MT/AT Setting | Transmission type, MT/AT (CVT). Body integrated unit custom setting values. | MT/AT | - |
| Destination Setting | Vehicle destination information. Body integrated unit internal data. | JPN KA, KC KS EU LHD Other than KS Canada(C0, C5) U.S. (U4, U5, U6, C6) EK, ER |
- |
| Seat Memory Setting | Presence or absence of the seat memory. Body integrated unit custom setting values. | ON/OFF | - |
| Illumination Sensor Setting | Presence or absence of the illumination sensor. Body integrated unit custom setting values. | ON/OFF | - |
| Factory initial setting | Status of the Factory/Market mode. Body integrated unit custom setting values. | Market/Factory | - |
| Ignition SW ON Count | Time stamp information. | 0 - 65534 | < Ref. to TIME STAMP , CAUTION, General Description. > |
| Count | Time stamp information. | Common/Originally | |
| Time Count | Time stamp information. | 0 - 53687091000 | |
| Sunroof setting | Presence or absence of sunroof. Body integrated unit custom setting values. | ON/OFF | - |
| Welcome Light (Exit) | Time setting to turn off the light for the welcome lighting (exiting) function. Body integrated unit custom setting values. | OFF 30 Sec 60 Sec 90 Sec |
- |
| Welcome Light Off Delay Time (Approaching) | Time setting to turn off the light for the welcome lighting (approaching) function. Body integrated unit custom setting values. | OFF 30 Sec 60 Sec 90 Sec |
- |
| Keyless Buzzer Volume | Volume of the keyless buzzer. Body integrated unit custom setting values. | 1 - 7 | - |
| Hazard switch Input | Turn hazard switch input ON/OFF status. Body integrated unit input value. Set to ON when the turn hazard switch is ON. | ON/OFF | - |
| P-CR OFF switch Input | Pre-collision brake OFF switch ON/OFF status. Body integrated unit input value. Set to ON when the pre-collision brake OFF switch is ON. | ON/OFF | - |
| LANE OFF switch Input | Lane departure warning OFF switch ON/OFF status. Body integrated unit input value. Set to ON when the lane departure warning OFF switch is ON. | ON/OFF | - |
| Towing switch input | Towing switch ON/OFF status. Body integrated unit input value. Set to ON when the towing switch is ON. | ON/OFF | - |
| Door handle Light output | Door handle light output ON/OFF status. Body integrated unit output value. Set to ON when the pull handle LED illuminates. | ON/OFF | - |
| Auto Dimmer Cancel setting | Sensitivity of auto dimmer cancel function. Body integrated unit custom setting values. | 0 (OFF) Least 2 Normal 4 Most |
- |