LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Anti-Theft System - Security And Locks) >> Door Lock Control System >> Inspection >> Check Trunk Opener Switch Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Trunk Opener Switch Circuit

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK DATA MONITOR. 
Using the Subaru Select Monitor, display the data of «R Gate Release SW input». < Ref. to OPERATION , Read Current Data. >
NOTE: For detailed operation procedures, refer to "Application help".
 Does the display switch between OFF ←→ ON when the trunk opener switch is operated? The trunk opener switch is normal. Go to step 2  .
2 CHECK HARNESS. 
  1. Disconnect the connectors of body integrated unit and trunk opener switch.
  2. Check the harness between the body integrated unit connector and trunk opener switch.

    Connector & terminal 

    (i171) No. 6 - (i258) No. 1: 

 Is harness normal? Go to step 3  . Repair or replace the harness.
3 CHECK HARNESS. 
Measure the resistance between the trunk opener switch connector and chassis ground.
Connector & terminal 
(i258) No. 4 - Chassis ground: 		 Is the resistance less than 10 Ω? Go to step 4  . Repair or replace the harness.
4 CHECK TRUNK OPENER SWITCH. 
Measure the resistance between terminals both when trunk opener switch is pressed and when not pressed.
Terminals 
No. 1 - No. 4: 		 Is the resistance less than 10 Ω when the switch is pressed and 1 MΩ or more when not pressed? Replace the body integrated unit. < Ref. to BODY INTEGRATED UNIT . > Replace the trunk opener switch.
scientia non olet · About LEMON Manuals