LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Anti-Theft System - Security And Locks) >> Keyless Entry Control Module >> Removal >> Outback Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Outback Model

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trim panel - rear apron RH. < Ref. to OUTBACK MODEL , REMOVAL, Rear Quarter Trim. >
  3. Remove the keyless entry control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the keyless entry control module.
      Fig 1: Locating Keyless Entry Control Module (Outback Model)
      G10272970Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals