Rear Lock Button: Inspection
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Using the Subaru Select Monitor, display «Rear gate/Trunk UNLOCK output» from «Data monitor».
- Check if the display changes when the rear lock button is operated.
- If the display is not correct as the result of inspection, refer to "General Diagnostic Table" of the "KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS)" article. < Ref. to KEYLESS ACCESS SYSTEM , INSPECTION, General Diagnostic Table. >