LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Anti-Theft System - Security And Locks) >> Rear Lock Button >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Lock Button: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The rear lock button is integrated with the switch - opener rear gate.
  • Open the panel - rear gate before disconnecting the ground terminal from battery sensor.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trim panel - rear gate. < Ref. to REMOVAL , Rear Gate Trim. >
  3. Remove the garnish assembly - rear gate. < Ref. to REMOVAL , Rear Gate Garnish. >
  4. Remove the rear lock button.
  1. Remove the garnish switch bracket from the garnish assembly - rear gate.
  2. Release the locks at both ends of the button - opener rear gate by pushing them with a flat tip screwdriver, and remove the button - opener rear gate.
  3. Remove the screws and detach the rear lock button.
    Fig 1: Locating Rear Lock Button Screws
    G10272998Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals