Read Cancel Code: Operation

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System».
On «Select System» display, select «Subaru Rear Vehicle Detection (RH)» or «Subaru Rear Vehicle Detection (LH)» and then select «Enter».
On «Select Function» display, select «Cancel Code».
NOTE:
- For operation procedures, refer to "Application help".
- For details concerning cancel codes, refer to the List of Cancel Codes. < Ref. to LIST OF CANCEL CODE . >