Ignition Key Lock: Inspection
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Terminal No. Inspection conditions Standard Between all terminals (A) LOCK 1 MΩ or more 2 - 4 (B) ACC Less than 1 Ω 1 - 2 - 4
5 - 6(C) ON Less than 1 Ω 1 - 3 - 4
5 - 6 - 7(D) ST Less than 1 Ω - Replace the ignition switch assembly if the inspection result is not within the standard.