LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Anti-Theft System - Security And Locks) >> Impact Sensor >> Adjustment >> Check Impact Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Impact Sensor

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull out the key from the ignition switch, or turn the ignition to OFF.
  2. Close all the windows.
  3. Close all the doors, trunk lid and rear gate. Leave open the front hood.
  4. Press the LOCK button of the keyless transmitter or access key from outside of vehicle.
  5. Check that the security indicator light blinks twice within 0.5 seconds in 2 second cycles immediately after door lock or after 30 seconds.
  6. Hit all windows with the palm with force repeatedly, to check for whether the security alarm operates. Lift up the front hood approx. 12 cm (4.7 in) or more, and then drop it off to check the operation of security alarm.
  7. If NG, adjust the impact sensitivity.
scientia non olet · About LEMON Manuals