LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Anti-Theft System - Security And Locks) >> Keyless Access Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Access Control Module: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the combination meter assembly. <Ref. to REMOVAL , Combination Meter.>
  3. Remove the keyless access control module.
    1. Remove the reinforcement - combination meter.
      NOTE: For model with navigation, remove the GPS antenna assembly. <Ref. to REMOVAL , GPS Antenna.>
    2. Disconnect the connector and remove the bolt.
      Fig 1: Locating Keyless Access Control Module Bolts
      G10272999Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals