LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Anti-Theft System - Security And Locks) >> Push Button Ignition Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Push Button Ignition Switch: Installation

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the push button ignition switch to the visor assembly - lower.
  2. Install the visor assembly - lower.
  3. Install the cover assembly - instrument panel LWR driver.
  4. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
scientia non olet · About LEMON Manuals