Auto Headlight Beam Leveler System: Procedure: Initialization
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the indicator in the meter is flashing twice repeatedly.
- Bounce the vehicle several times to normalize the suspension.
- Make certain that someone is seated in the driver's seat.
- Turn the ignition switch to ON, and within 1.5 - 20 seconds, turn the lighting switch OFF → ON for three successive times.
- Make sure that the indicator in the meter flashes three times and then turns OFF, indicating that initialization has been successfully completed. (At this time, the headlight beam drops once, and then returns to the original position.)
- Perform beam adjustment for the headlight. <Ref. to ADJUSTMENT , Headlight Assembly.>