LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Lighting System) >> Rear Combination Light Assembly >> Installation >> Sedan Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sedan Model

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace the gasket - rear combination with a new part.
  2. Install the light assembly - rear combination.
    CAUTION: Be careful not to catch the harness in between the parts.

    Tightening torque: 

    4.5 N.m (0.5 kgf-m, 3.3 ft-lb) 

  3. Install the trunk room trim.
  4. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>