Outback Model

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the light assembly - rear combination.
1. Remove the clips and detach the rear combination light covers.
2. Remove the bolt and release the clip.
3. Disconnect the connector and remove the light assembly - rear combination.
  CAUTION: Be careful not to damage the clips.
  
  Fig 1: Removing Rear Combination Light Assembly (Outback Model)
  Courtesy of SUBARU OF AMERICA, INC.