Check Each Connection

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: For models with 7 inch display, refer to "Navigation System". <Ref. to CHECK EACH CONNECTION , INSPECTION, Navigation System.>

Turn the ignition switch to ACC.
(a) Press the button to display the Audio OFF screen.
Touch the screen in order from (b) to (e).

Fig 1: Pressing Button To Display Audio OFF Screen
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the diagnostic mode.
{Line Diag} screen is displayed.
Check the connection status with the {Connectivity Check} in the {Line Diag} screen.

Fig 2: Display - Connectivity Check In Line Diag Screen
Courtesy of SUBARU OF AMERICA, INC.

OK: Each connection device is connected properly.

NG: No connection or abnormal connection is detected.

NOTE: Check the external connection terminals (USB and AUX) by connecting a memory for check or a pin jack.
Check the connection status of the connector. If there are no problems, the connection device or unit could be faulty.