Outback Model
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rearview camera assembly.
- Install the garnish assembly - rear gate.
Tightening torque:
4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
- Install the trim panel - rear gate.
- Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
- Confirm the marker position. <Ref. to INSPECTION , Rearview Camera System.>