Section 71 (Power Steering System (Service Information)): General Description: Specification
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| Model | Sedan model | OUTBACK model | ||
|---|---|---|---|---|
| Whole system | Minimum turning radius: | m (ft) | 5.6 (18.37) | 5.4 (17.72) |
| Steering angle | Inner wheel | 37.6°±1.5° | 38.6°±1.5° | |
| Outer wheel | 32.8°±1.5° | 33.8°±1.5° | ||
| Steering wheel diameter: | mm (in) | 375 (14.76) | ||
| Lock-to-lock revolution number | 2.82 | |||
| Gearbox | Type | Rack & pinion type | ||
| Backlash | 0 (automatic adjusting) | |||
| Motor (Temperature 20°C (68°F)) | Rated voltage: | V | 13.5 | |
| Rated torque: | N.m (kgf-m, ft-lb) | 4.43 (0.45, 3.27) | ||
| Rated revolution speed: | rpm | 1380 | ||
| Rated current: | A | 63 | ||
| Rated output: | W | 640 | ||
STEERING WHEEL SPECIFICATION
| Free play: | mm (in) | 17 (0.67) or less |
COLUMN ASSEMBLY STEERING SPECIFICATION
| Clearance: Between steering wheel and cover assembly - column |
mm (in) | 4 - 6 (0.16 - 0.24) |
STEERING GEARBOX SPECIFICATION
| Sliding resistance: | N (kgf, lbf) | 360 (37, 81) or less Difference between right and left sliding resistance: 20% or less |
| Rack shaft play in radial direction: mm (in) | Right-turn steering | Play in the horizontal direction: 0.6 (0.024) or less Play in the vertical direction: 0.4 (0.016) or less |
| Left-turn steering | 0.4 (0.016) or less | |
| Input shaft play: mm (in) | In radial direction | 0.18 (0.0071) or less |
| In axial direction | 0.27 (0.0106) or less | |
| Rotational resistance: | N (kgf, lbf) | Maximum allowable value: 18 (1.8, 4.0) or less Difference between right and left sliding resistance: 20% or less |
STEERING EFFORT (FORCE) SPECIFICATION
| At standstill on paved road with engine idling: | N (kgf, lbf) | 29.4 (3.0, 6.6) or less |
| At standstill on paved road with engine stalled: | N (kgf, lbf) | 294.2 (30, 66.2) or less |