LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Combination Meter (Diagnostics)) >> System Operation Check Mode >> Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Operation Check Mode: Operation

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On «Main Menu» display, select «Each System Check».
  2. On «System Selection Menu» display, select «Combination Meter».
  3. On «Combination Meter» display, select «Work Support».
  4. On «Work Support» display, select an item to be checked.
    NOTE:
    • For details concerning the work procedure, refer to the "PC application help for Subaru Select Monitor".
    • If not equipped (depending on destination area or vehicle equipment condition), process will not go on.
    CAUTION: After executing the system operation check mode, execute the Clear Memory Mode. <Ref. to OPERATION , Clear Memory Mode.>
scientia non olet · About LEMON Manuals