Section 4 (Starting System & Charging System (STI)): Generator: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

CAUTION: Check and adjust the front side belt tension. <Ref. to FRONT SIDE BELT , INSPECTION, V-belt.>

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 1: Locating Generator Bracket Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

16 N.m (1.6 kgf-m, 11.8 ft-lb)

Fig 2: Identifying Generator Connector And Terminal

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)

Fig 3: Locating V-Belt Cover Bolt

Courtesy of SUBARU OF AMERICA, INC.