Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to ON. (Engine OFF)
- Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. <Ref. to
DISPLAY CURRENT ENGINE DATA
, OPERATION, Subaru Select Monitor.> <Ref. to
DISPLAY CURRENT ENGINE DATA
, OPERATION, Subaru Select Monitor.>
Accelerator pedal sensor Accelerator pedal opening angle signal Standard Main 0.0% 0.3 - 1.1 V 100.0% 2.3 - 3.8 V Sub 0.0% 0.3 - 1.1 V 100.0% 2.3 - 3.8 V