Steering Lock Control Module: Removal

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note.>
NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
Remove the column assembly - steering. < Ref. to REMOVAL , Steering Column.>
Remove the steering lock control module.
1. Secure the column assembly - steering in a vise.
2. Use the reverse tap or drill to remove the set bolt and remove the steering lock control module.
  CAUTION: Do not apply any impact to the set bolt by a chisel or punch.
  
  Fig 1: Locating Bolt Of Steering Lock Control Module
  Courtesy of SUBARU OF AMERICA, INC.