Power Window Regulator Master Switch Assembly: Installation

Installation of power window regulator master switch assembly
1. Engage the 4 claws and install the power window regulator master switch assembly to the front armrest base panel UPR LH.
  
  Fig 1: Locating Power Window Regulator Master Switch Assembly Claws
  Courtesy of SUBARU OF AMERICA, INC.
Installation of the power window regulator master switch assembly W/ front armrest base panel UPR LH (Refer to ADJUSTMENT )
Installation of the front door trim board SUB-ASSEMBLY LH (Refer to ADJUSTMENT )
Installation of the door armrest cover LH (Refer to ADJUSTMENT )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
Settings when removing/installing battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )