Circuit description
If the door glass or power window regulator motor does not operate smoothly, auto-reverse function is activated automatically. Consequently, the AUTO UP function cannot fully close the windows.
CAUTION:
- When replacing the power window regulator motor assembly with a new one or reusing its motor, perform the initialization of the power window system. (Refer to REGISTRATION SETTINGS )
- After replacing door glass and/or weather strip, AUTO UP operation sometimes activates auto-reverse function. In this case, the door glass is fully closed by performing the procedure in the following order (*3). AUTO UP HOLD →(the auto-reverse function (glass reverse operation)) →(*1) →AUTO UP HOLD →(the auto-reverse function (glass reverse operation)) →AUTO UP HOLD (*2).
*1: If DOWN operation, IG OFF & timer operation OFF, and/or index operation is executed between auto-reverse function and AUTO UP HOLD, return to the beginning of the procedure.
*2: The upper end position of the glass is relearned by this operation (AUTO UP HOLD). (Refer to REGISTRATION SETTINGS )
*3: The failure of the door glass or regulator may prevent full closing of the door glass.