Display Of Current Data / System Operation Check Mode

Inspection with SSM3

Data monitor

Using SSM3, check [Current Data Display] to determine functionality and narrow down the defective part.

SSM3 screen: [Each System Check]→ [Integ. unit mode]→ [Current Data Display & Save]

ITEM DESCRIPTION

Item Name

Description/display range

Normal value

Remarks

[Rr Defogger op. mode]

Rear defogger operation status/Display range: Normal - Continuous⁽¹⁾

Normal: OFF after 15 minutes
Continuous: 15-min. operation and 2-min. stop are repeated.

[Rear Defogger SW Input]

Rear defogger switch status/Display range: [ON] - [OFF]

[Rr Defogger output]

Rear defogger output status/Display range: [ON] - [OFF]

⁽¹⁾	For automatic air conditioning system

SSM3 display: [Each System Check] →[Air Condition System] →[Current Data Display Save]

ITEM DESCRIPTION

Item Name	Description/display range	Normal value	Remarks
[Rear Defogger relay]	Rear defogger relay status/Display range: [ON] - [OFF]	-	-

System Operation Check Mode

Using SSM3, check [System Operation Check Mode] to determine functionality and narrow down the defective part.

SSM3 display: [Each System Check] →[Integ. unit mode] →[System Operation Check Mode]

ITEM DESCRIPTION

Item Name	Drive
[Rear defogger]	Rear defogger output ON / OFF

SSM3 display: [Each System Check] →[Power Window] →[System Operation Check Mode]

ITEM DESCRIPTION

Item Name	Drive
[P seat power window UP/DOWN]	UP / DOWN