Customize Function
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Customization of key warning system
- Customization via SSM3CAUTION:
- When a customer requests a function change, check if the function is customizable.
- Before starting customization, record the current settings.
- Before performing the troubleshooting procedure for a function, check that the function is set to the initial settings.
NOTE: The items below are customizable.- Connect the SSM3 to the DLC3.
- Turn IG SW to ON.
- Turn on the SSM3.
- Enter the following menus. [Integ. unit mode]→[Unit customizing]
- Referring to the table below, perform settings.
WARNINGDisplay name Initial setting Contents Setting Controller ECM [Key Remind Sound] Normal Function to change the cycle of the key warning buzzer. Normal, slow, fast Combination meter assembly
- Customization via SSM3