Current Data Display & Save / System Operation Check Mode

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

[Current Data Display & Save]

CAUTION: The values indicated for the normal conditions are informative values. Do not depend on reference value only when judging if the part is faulty.

NOTE: By reading [Current Data Display & Save] on SSM3, you can check the values and status of switches, sensors, actuators and other items without removing any parts. This inspection is very useful because it allows an operator to read any intermittent conditions or signals without disturbing parts or wiring. By reading the current data display & save information at an initial phase of troubleshooting, you can save time for diagnosis.

Connect the SSM3 to the DLC3.
Turn the ignition switch to ON.
Turn on the SSM3.
Enter the following menu items: [Integ. unit mode] →[Current Data Display & Save].

Based on the display contents of SSM3, read the current data display & save.

MAIN BODY

Item Name

Description/display range

Normal value

Remarks

[D Door Courtesy]

Driver's door courtesy light switch signal / ON or OFF

ON: Driver's door is closed
OFF: Driver's door is open

[Door Lock SW-Lock]

Door control switch (power window regulator master switch assembly or power window regulator switch assembly ⁽¹⁾) lock signal / OFF or ON

OFF: Lock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly ⁽¹⁾) is not pressed
ON: Lock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly ⁽¹⁾) is pressed

[Door Lock SW-Unlock]

Door control switch (power window regulator master switch assembly or power window regulator switch assembly ⁽¹⁾) unlock signal / OFF or ON

OFF: Unlock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly ⁽¹⁾) is not pressed
ON: Unlock side of door control switch (power window regulator master switch assembly or power window regulator switch assembly ⁽¹⁾) is pressed

[P Door Courtesy]

Passenger's door courtesy light switch signal / ON or OFF

ON: Passenger's door is closed
OFF: Passenger's door is open

[Luggage Courtesy SW]

Trunk courtesy switch signal / OFF or ON

OFF: Trunk is closed
ON: Trunk is open

[Ignition]

Ignition switch state / OFF or ON

FF: IG SW OFF
ON: IG SW ON

[ACC SW]

Ignition switch state / OFF or ON

OFF: IG SW OFF
ON: Ignition switch ON (ACC)

[Key Unlock Warning SW]

Unlock warning switch signal / OFF or ON

OFF: Key is not inserted in ignition key cylinder
ON: Key is inserted in ignition key cylinder

⁽¹⁾	With passenger's door control switch

System Operation Check Mode

NOTE: By performing active tests with SSM3, you can operate relays, VSV, actuators and other devices without removing any parts. This functional inspection method is very useful because it helps check state-related signals and identify the faulty part without removing any parts and wiring. By performing active tests at an initial phase of troubleshooting, you can save time for diagnosis. The current data display & save information can be displayed during system operation check mode.

Connect the SSM3 to the DLC3.
Turn the ignition switch to ON.
Turn on the SSM3.
Enter the following menu items: [Integ. unit mode] →[Work Support] →[System Operation Check Mode].

Execute the system operation check mode according to the SSM3 display.

MAIN BODY

Item Name	Description/display range	Normal value	Remarks
[Door Lock]	Door lock motor	OFF / Unlock / Lock	-
[D-Door Unlock]	Driver's door lock motor	OFF / ON	-
[Trunk and Back-Door Open]	Back door lock motor	OFF / ON	-