Select Lever: Assembly

Installation of swivel
1. Install the 2 washers, spacer, bushing, and swivel with a snap pin.
  
  Fig 1: Locating Snap Pin, Washers, Bushing, Spacer And Swivel
  Courtesy of SUBARU OF AMERICA, INC.
Installation of gasket
1. Install 4 spacer plates and the gasket.
  
  Fig 2: Locating Spacer Plates And Gasket
  Courtesy of SUBARU OF AMERICA, INC.
Installation of select arm bracket
1. Apply Multemp D to the spring and the rod.
2. Install the spring and the rod to the select arm bracket.
  
  Fig 3: Installing Spring And Rod To Select Arm Bracket
  Courtesy of SUBARU OF AMERICA, INC.
3. Apply Multemp D to the select lever COMPL and the select arm bracket.
  
  Fig 4: Applying Multemp D To Select Lever COMPL And Select Arm Bracket
  Courtesy of SUBARU OF AMERICA, INC.
4. Apply Multemp D to the sliding surface of the rod and install the select arm bracket to the select lever COMPL.
  
  Fig 5: Installing Select Arm Bracket To Select Lever COMPL
  Courtesy of SUBARU OF AMERICA, INC.
Installation of select lever COMPL
1. Set the select arm bracket together with the select lever COMPL as a single unit to the base plate.
  
  Fig 6: Installing Select Lever COMPL
  Courtesy of SUBARU OF AMERICA, INC.
Installation of arm COMPL
1. Insert the arm COMPL to the base plate.
  
  Fig 7: Inserting Arm COMPL To Base Plate
  Courtesy of SUBARU OF AMERICA, INC.
2. Use a pin punch 3 and hammer to drive in a new pin.
  
  Fig 8: Driving In New Pin
  Courtesy of SUBARU OF AMERICA, INC.
Installation of grommet
1. Install the grommet.
  
  Fig 9: Locating Grommet
  Courtesy of SUBARU OF AMERICA, INC.
Installation of D rod
1. Install the bushing D lock.
2. Install the cushion detent lock to the D rod.
3. Apply Multemp D to the D lock spring and the D rod.
4. Install the D lock spring and the D rod.
5. Install the D lock clamp.
  
  Fig 10: Installing Cushion Detent Lock To D Rod
  Courtesy of SUBARU OF AMERICA, INC.
Installation of solenoid unit
1. Apply Multemp D to the solenoid unit and the pin.
2. Set the solenoid unit together with the shift lock release arm as a unit to the base plate and insert the pin.
  
  Fig 11: Installing Solenoid Unit Pin
  Courtesy of SUBARU OF AMERICA, INC.
Installation of guide plate
1. Engage the 2 claws and install the guide plate to the base plate.
  
  Fig 12: Identifying Guide Plate To Base Plate Claws
  Courtesy of SUBARU OF AMERICA, INC.
2. Install the shaft guide pin and a new clamp push nut.
  
  Fig 13: Locating Shaft Guide Pin And Clamp Push Nut
  Courtesy of SUBARU OF AMERICA, INC.
3. Connect the connectors No. 2 and No. 3 of the shift lock solenoid connector and the connectors No. 10 and No. 11 of the manual mode switch connector.
  
  Fig 14: Connecting Connectors No. 2 And 3 Of Shift Lock Solenoid Connector And Connectors No. 10 And No. 11 Of Manual Mode Switch Connector
  Courtesy of SUBARU OF AMERICA, INC.
4. Lock the terminal of the harness connector.
  
  Fig 15: Locking Terminal Of Harness Connector
  Courtesy of SUBARU OF AMERICA, INC.
5. Engage the claw and install the connector.
  
  Fig 16: Locating Connector
  Courtesy of SUBARU OF AMERICA, INC.