Speed Sensor: Installation

Installation of transmission revolution sensor (SP2)
1. Apply auto fluid WS to a new O-ring and install it to the transmission revolution sensor (SP2).
2. Install the transmission revolution sensor (SP2) with the bolt.
  Standard value: T=5.4 N.m {55 kgf.cm} {4.0 ft.lbf}
3. Connect the connector.
4. Install the automatic transmission Assembly. (Refer to INSTALLATION )
Installation of transmission revolution sensor (NT)
1. Apply auto fluid WS to a new O-ring and install it to the transmission revolution sensor (NT).
2. Install the transmission revolution sensor (NT) with the bolt.
  Standard value: T=5.4 N.m {55 kgf.cm} {4.0 ft.lbf}
3. Connect the connector.
Installation of under cover COMPL T/M (refer to INSTALLATION )
Installation of under cover front AL (refer to INSTALLATION )
Data monitor check
(Refer to CURRENT DATA DISPLAY & SAVE/SYSTEM OPERATION CHECK MODE )