Brake Actuator Assembly: Assembly

Installation of brake actuator bolt cushion
1. Install 3 new brake actuator bolt cushions (A and B) to the actuator assembly.
  
  Fig 1: Locating Brake Actuator Bolt Cushions
  Courtesy of SUBARU OF AMERICA, INC.
Installation of brake actuator bracket assembly
1. With 3 new nuts and 3 new washers, install the brake actuator bracket assembly to the brake actuator assembly.
  Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
  
  CAUTION: New brake actuator assembly is filled with brake fluid. Therefore, do not remove the hole plug until the brake tube is connected.
  
  Fig 2: Locating Brake Actuator Bracket Assembly Nuts And Washers
  Courtesy of SUBARU OF AMERICA, INC.