LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Entry Start System Start System (Keyless Start) >> Entry & Start System (Start Function) >> DTC B2276: ACCR Signal Abnormal >> Circuit description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit description

This DTC is output when an input problem occurs in the ACC relay cut input signal circuit of the collation ECM (smart key ECM assembly).

NOTE: If you remove and then reconnect the battery cable, the power returns to the mode it was before you removed the cable.
DTC DETECTION STATUS

DTC No. DTC detection status Faulty part DTC Output Confirmation Operation
B2276 A problem is detected (1-trip detection logic (1)) in the ACC relay cut input signal circuit of the collation ECM (smart key ECM assembly).
  • Collation ECM (smart key ECM assembly)
  • EFI system
  • Wiring harness or connector
 Start the engine.
(1) The code is output only when the problem is found and the engine switch is on (IG).
DTC DETECTION CONDITION

Vehicle status when a problem is detected Failsafe function when a problem is detected
  • When the engine starts, the ACC relay is not cut.
  • The start assembly turns slowly.
 -

Related [Current Data Display & Save] and [System Operation Check Mode] items

DTC DESCRIPTION

DTC No. [Current Data Display & Save] items [System Operation Check Mode] items
B2276 - -
scientia non olet · About LEMON Manuals