LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Vehicle Stability Control System) >> Vehicle Stability Control System >> Checking/Clearing Diagnostic Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking/Clearing Diagnostic Codes

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Diagnostic code output check
    1. Diagnostic code reading by SSM3
      1. Connect SSM3 to DLC3 with IG turned OFF.
      2. Turn IG ON and follow SSM3's display to read the diagnostic code.
      CAUTION: If there is an error, clear the diagnostic code memory after repairing.
  2. Clear the diagnostic code and the freeze frame data.
    1. Diagnostic code clearance by SSM3
      1. Connect SSM3 to DLC3 with IG turned OFF.
      2. Turn IG ON and follow SSM3's display to clear the diagnostic code.
scientia non olet · About LEMON Manuals