Cruise Control Main Switch: Installation
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY
- Connect the cruise control main switch wire connector to the cruise control main switch assembly.
- Set the cruise control main switch assembly to the lower steering wheel cover.
- Engage the 2 claws and install the lower steering wheel cover.
- Install the 4 screws.
- Engage the clamp.
- INSTALL STEERING WHEEL ASSEMBLY (Refer to INSTALLATION )
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.43ft.lbf}