LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Security Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Control Module: Removal

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". < Ref. to CAUTION , General Description. >
  • Do not allow harness and connectors to interfere or get tangled up with other parts.
  • If the steering wheel and steering angle sensor (steering roll connector) are removed, perform "VSC (VDC) Centering Mode" of the VDC. < Ref. to VDC SENSOR MIDPOINT SETTING MODE (MODELS WITHOUT EYESIGHT) , ADJUSTMENT, VDC Control Module and Hydraulic Control Unit (VDCCM& H/U). >
  1. Remove the steering wheel. < Ref. to REMOVAL , Steering Wheel. >
  2. Remove the instrument panel assembly. < Ref. to REMOVAL , Instrument Panel Assembly. >
  3. Remove the heater and cooling unit assembly. < Ref. to REMOVAL , Heater and Cooling Unit. >
  4. Remove the security control module.
    1. Disconnect the connector.
    2. Remove the nuts, and remove the security control module.
      Fig 1: Locating Security Control Module Nuts
      G08319276Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals