| ABS Sequence Control Mode |
Operate the valve and pump motor continuously to perform the ABS sequence control. |
< Ref. to
ABS SEQUENCE CONTROL
. > |
| VDC Check Mode |
Operate the valve and pump motor continuously to perform the VDC sequence control. |
< Ref. to
VDC SEQUENCE CONTROL
. > |
| Set mode Str.A.Sen.N&Lat.GSen.0p |
Set the steering angle sensor neutral position and the lateral G sensor "0" point. |
< Ref. to
NEUTRAL OF STEERING ANGLE SENSOR & LATERAL G SENSOR 0 POINT SETTING (MODEL WITH EYESIGHT)
, ADJUSTMENT, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |
| Longitudinal G sensor and lateral G sensor 0 point setting mode |
Set "0" point of the longitudinal G sensor and the lateral G sensor. |
< Ref. to
LONGITUDINAL G SENSOR & LATERAL G SENSOR 0 POINT SETTING MODE (MODEL WITH EYESIGHT)
, ADJUSTMENT, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |