LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Security And Locks) >> Door Lock Control System >> Inspection >> Check Rear Gate Opener Button Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Rear Gate Opener Button Circuit

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Step Check Yes No
1 CHECK CURRENT DATA. 
Using the Subaru Select Monitor, display the data of «R Gate Release SW input».
NOTE: For detailed procedures, refer to "PC application help for Subaru Select Monitor".
 Does the display change to OFF ←→ ON, when the rear gate opener button is operated? Rear gate opener button is normal. Go to step 2  .
2 CHECK HARNESS. 
  1. Disconnect the connectors of body integrated unit and rear gate opener button.
  2. Check the harness between the body integrated unit and rear gate opener button.

    Connector & terminal (i84) No. 10 - (D47) No. 1: 

 Is harness normal? Go to step 3  . Repair or replace the harness.
3 CHECK HARNESS. 
Measure the resistance between the rear gate opener button connector and chassis ground.
Connector & terminal (D47) No. 2 - Chassis ground: 		 Is the resistance less than 10 Ω? Go to step 4  . Repair or replace the harness.
4 CHECK REAR GATE OPENER BUTTON. 
Measure the resistance between terminals both when the rear gate opener button is pressed and when not pressed.
Terminals No. 1 - No. 2: 		 Is the resistance less than 10 Ω when the switch is pressed and 1 MΩ or more when not pressed? Replace the body integrated unit. < Ref. to BODY INTEGRATED UNIT .> Replace the rear gate opener button.
scientia non olet · About LEMON Manuals