Impact Sensor: Installation
WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Pull out the key from the ignition switch, or turn the power to OFF.
- Close all the doors, trunk lid and rear gate.
- Press the UNLOCK button of the keyless transmitter or access key.
- Disconnect the ground cable from battery. < Ref. to
BATTERY
, NOTE, Note.>NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
- Install the impact sensor.
- Change the setting of impact sensor using Subaru Select Monitor.